Producătorul de mașini de îngrășământ deșeuri de atunci 2005 [email protected]| +86 182 0399 3035| WhatsApp
YUSHUNXIN

Echipamente De Compostare De Vanzare

Composting equipment is the core of a waste-to-fertilizer plant, because fermentation determines whether the finished product is stable, hygienic and safe to sell. Shunxin manufactures the full range: moving and crawler windrow turners for open pads, groove-type turners on rails for fixed factory layouts, self-propelled machines that a single operator drives, chain plate turners for deep bays, forklift attachments for low-investment operations, and fully enclosed in-vessel fermentation tanks for odour-sensitive urban sites.

Choosing between them is a question of tonnage, layout and how much control you need over temperature and odour. O 100 t/day farm composting manure in an open yard needs a robust turner and good drainage. O 500 t/day municipal plant composting food waste in a residential district needs closed vessels, forced aeration and biofiltration. Between those two extremes, this page and the linked equipment pages explain the trade-offs.

Mașină Turner de compost pe scară largă

Windrow Turner de vânzare

Turner de compost propus de sine

În echipamentele de compostare a navei

Întrebări frecvente

What makes a good compost turner?

Four things: enough turning width and drum diameter to aerate the whole pile, a slow rotating drum that lifts and mixes rather than smearing the material, a chassis strong enough for the daily duty cycle, and hydraulic control so the drum height follows the pile. A turner that only throws material from the top leaves the core anaerobic.

How big should my windrow be?

For most manure a windrow of 1.5–2 m height and 3–4 m base width is ideal, giving a core that stays above 55 °C without becoming anaerobic. Very wide piles need more turning capacity; very narrow piles lose heat and take longer.

Can composting equipment also handle food waste and sludge?

Da, but not in an open windrow at high volume. Food waste and sludge are wetter and more odorous, so they are normally processed in in-vessel fermentation tanks or in grooved channels with aeration and a bulking agent, then finished in windrows.

How do I choose between a self-propelled and a towed turner?

A self-propelled turner is faster to reposition and needs only one operator, which suits contractors, multiple piles and changing layouts. A towed or crawler turner pulled by a tractor costs less and works well when the piles stay in a fixed line.

WhatsApp
Obțineți o cotație WhatsApp