
Máy quay vòng phân trộn quy mô lớn
Large scale compost turner machines for 100–1,000 t/day plants: groove-type, wheel-type and chain plate turners for mu…
Đọc thêm →
Composting equipment is the core of a waste-to-fertilizer plant, because fermentation determines whether the finished product is stable, hygienic and safe to sell. Shunxin manufactures the full range: moving and crawler windrow turners for open pads, groove-type turners on rails for fixed factory layouts, self-propelled machines that a single operator drives, chain plate turners for deep bays, forklift attachments for low-investment operations, and fully enclosed in-vessel fermentation tanks for odour-sensitive urban sites.
Choosing between them is a question of tonnage, layout and how much control you need over temperature and odour. A 100 t/day farm composting manure in an open yard needs a robust turner and good drainage. A 500 t/day municipal plant composting food waste in a residential district needs closed vessels, forced aeration and biofiltration. Between those two extremes, this page and the linked equipment pages explain the trade-offs.
Chụp ảnh tại xưởng Xingyang của chúng tôi và trên trang web của khách hàng. Không có hình mờ, không có số điện thoại.





Four things: enough turning width and drum diameter to aerate the whole pile, a slow rotating drum that lifts and mixes rather than smearing the material, a chassis strong enough for the daily duty cycle, and hydraulic control so the drum height follows the pile. A turner that only throws material from the top leaves the core anaerobic.
For most manure a windrow of 1.5–2 m height and 3–4 m base width is ideal, giving a core that stays above 55 °C without becoming anaerobic. Very wide piles need more turning capacity; very narrow piles lose heat and take longer.
Đúng, but not in an open windrow at high volume. Food waste and sludge are wetter and more odorous, so they are normally processed in in-vessel fermentation tanks or in grooved channels with aeration and a bulking agent, then finished in windrows.
A self-propelled turner is faster to reposition and needs only one operator, which suits contractors, multiple piles and changing layouts. A towed or crawler turner pulled by a tractor costs less and works well when the piles stay in a fixed line.
Gửi nguyên liệu thô và công suất mục tiêu của bạn - các kỹ sư của chúng tôi trả lời trong vòng một ngày làm việc kèm theo lộ trình xử lý, danh sách thiết bị và ngân sách.
Đội ngũ kỹ thuật của chúng tôi sẽ trả lời trong vòng một ngày làm việc. Vì bất cứ điều gì khẩn cấp, nhắn tin cho chúng tôi trên WhatsApp.
Mở WhatsApp